Mitsubishi MUT III Vehicle Diagnostic & Programming Tools
Support Gasoline vehicles and also FUSO diesel vehicles
MUT-III can do gasoline vehicles and also FUSO diesel vehicle,
support online update. It can do diagnostic and also ECU
programming. Have memory card and ECU file on CD. Software install
easy, can used only windows XP system.
Newest version: 2010Version
This one can do diagnose and also ECU programming.
Att. Only windows XP system
A personal computer (PC) is connected to the MUTIII unit and used
as a system's control terminal, and communicates with a vehicle ECU
through the VCI. In addition to being able to handle all diagnosis
functions covered by the conventional MUT-II tester, the MUT-III
system can display data as easy-to-understand diagrams and graphs
on a large screen of the PC. Unlike the MUT-II, the MUT-III can
retain data on all vehicles, from old to new models, classified
according to destination in the PC's hard disk. This eliminates the
awkward but essential job with the MUT-II, of switching the data
list (communications protocol data and diagnosis item list
database) by replacing the ROM pack with another according to the
vehicle model and year model.
New functions that make use of the advantages of the PC are also
being developed. For example, the workshop manual viewer is a
useful function for mechanics as they no longer have to carry
around a thick manual and search for relevant pages while working
on a vehicle. The workshop manual viewer is currently available for
certain vehicle models, and allows users to retrieve the pages
containing the failure code for a particular problem at the push of
1.Language including: English, Chinese, French, Spainsh,
(1)Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle ECUs and the
1)When connected with the PC
-Vehicle diagnosis (Interactive fault diagnosis)
-SWS communication; CAN communication support
-Volt, Ohm, measurement
-Fuel pressure measurement (Not available in US)
2)When used with the V.C.I.unit (disconnected from PC)
-V.C.I. Stand-alone diagnosis
-Belt Tension measurement
(2) Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card. The one provided
(with reprogramming data) is a Compact Flash memory card (MB991853)
inserted into the CF card adapter (MB991939).
(3) M.U.T.-III Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have only one
16-pin diagnosis connector.
-Supports fault diagnosis and ECU updating on the above-described
-Supports the CAN communication system
(4) M.U.T.-III Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a16-pin +
12-pin or 16-pin + 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin)diagnosis
connector, connect the M.U.T.-II adapter harness(MB991498) to the
end of this harness in the same as M.U.T.-II, and power is supplied
from the cigarette lighter socket.